sensors - Second Linux Kernel Build with PTS
nct6798-isa-0290
Adapter: ISA adapter
in0: 712.00 mV (min = +0.00 V, max = +1.74 V)
in1: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in2: 3.44 V (min = +0.00 V, max = +0.00 V) ALARM
in3: 3.36 V (min = +0.00 V, max = +0.00 V) ALARM
in4: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in5: 1.10 V (min = +0.00 V, max = +0.00 V)
in6: 208.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in7: 3.44 V (min = +0.00 V, max = +0.00 V) ALARM
in8: 3.38 V (min = +0.00 V, max = +0.00 V) ALARM
in9: 1.84 V (min = +0.00 V, max = +0.00 V) ALARM
in10: 864.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in11: 2.05 V (min = +0.00 V, max = +0.00 V) ALARM
in12: 1.04 V (min = +0.00 V, max = +0.00 V) ALARM
in13: 256.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in14: 184.00 mV (min = +0.00 V, max = +0.00 V) ALARM
fan1: 2045 RPM (min = 0 RPM)
fan2: 2008 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
fan6: 566 RPM (min = 0 RPM)
fan7: 0 RPM (min = 0 RPM)
SYSTIN: +21.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +125.0°C) sensor = thermistor
CPUTIN: +63.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +125.0°C) sensor = thermistor
AUXTIN0: +104.0°C (high = +80.0°C, hyst = +75.0°C) ALARM
(crit = +125.0°C) sensor = thermistor
AUXTIN1: +33.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +125.0°C) sensor = thermistor
AUXTIN2: -60.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +100.0°C) sensor = thermistor
AUXTIN3: +85.0°C (high = +80.0°C, hyst = +75.0°C) ALARM
(crit = +125.0°C) sensor = thermistor
AUXTIN4: +21.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +100.0°C)
PECI Agent 0 Calibration: +77.0°C (high = +80.0°C, hyst = +75.0°C)
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
PCH_MCH_TEMP: +0.0°C
TSI0_TEMP: +88.1°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +86.0°C
Tccd1: +58.0°C
Tccd2: +65.8°C